YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD
YUELON is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems. Our company was established in 1998 and is privately held.
Precision induction heating solutions are our specialty. Use induction heating to improve the efficiency and effectiveness for industrial heating process. that are used for application such as brazing, annealing, quenching, forging, melting, shrink fitting etc.
Our Induction heating equipment are divided into five major series according to the frequency:
Medium Frequency induction heating machine (abbr. MF series): 1KHZ - 20KHZ
Medium frequency induction heater with series oscillating circuit (abbr. MFS series): 0.2-10KHZ
High Frequency induction heater (abbr: HF series): 30KHZ-100KHZ
Super-audio Frequency induction heaters (abbr. SF series) : 8-40KHZ
Ultrahigh Frequency induction heaters (abbr.UF series): 100KHZ-1.1MHZ
Main Specifications of MF heaters.
|
Model
|
MF-15
|
MF-25
|
MF-35
|
MF-45
|
MF-70
|
MF-90
|
MF-110
|
MF-160
|
|
Max Input
power
|
15KW
|
25KW
|
35KW
|
45KW
|
70KW
|
90KW
|
110KW
|
160KW
|
|
Max Input current
|
23A
|
36A
|
51A
|
68A
|
105A
|
135A
|
170A
|
240A
|
|
Output current
|
3-22A
|
5-45A
|
10-70A
|
15-95A
|
20-130A
|
25-170A
|
30-200A
|
50-500A
|
|
output voltage
|
70-550V
|
|
Input
voltage
|
3phase 380V ±20% 50 or 60HZ or according customer’s requirement.
|
|
Frequency
|
1KHZ – 20KHZ according customer’s workpiece require.
|
|
Duty cycle
|
100% 24hours continuous working
|
|
Generator Net weight
|
26
|
28
|
35
|
47
|
75
|
82
|
95
|
125
|
|
Generator Size
L x W x H
|
470x270x450mm
|
520x270x450mm
|
650x350x550mm
|
750x400x870mm
|
820x500x870mm
|
|
Timer
|
Heating time: 0.1-99.9seconds retaining time: 0.1-99.9seconds
|
|
Front panel
|
LCD, display frequency, power, time etc.
|
|
Whole systems water flow
|
≥0.2Mpa ≥6L/Min
|
≥0.3Mpa ≥10L/Min
|
≥0.3Mpa ≥20L/Min
|
≥0.3Mpa ≥30L/Min
|
|
Power
supply
water flow
|
≥0.2Mpa ≥3L/Min
|
≥0.2Mpa ≥4L/Min
|
≥0.2Mpa ≥6L/Min
|
≥0.2Mpa ≥10L/Min
|
|
Water way
|
1 water inlet, 1 water outlet
|
1 water inlet, 3 water outlet
|
|
Max
water temperature
|
≤45℃
|
General introduction MF series: frequency range (1-20KHZ) is suitable for the penetrating heat of shafts and rods and other type metal parts for heat treatment or forging or metal melting.
MF melting furnace and MF forging furnace are the two most widely application in heating systems now.
Except those two usage, MF series are also used widely for heating , matching, tube heating and so on.
Features:
-
All-solid-state IGBT frequency conversion and power adjustment, soft-switching resonance dual-control and frequency automatic tracking technology is the reliability of guarantee.
-
Module and soft switching inverting technologies are used in the production of the generator, higher reliability can be achieved;
-
Small size and portable, compared with SCR controlled machine, only 1/10 working space is needed, greatly reduce occupation space;
-
High efficiency and energy saving: a high power factor and power efficiency within the scope of full power.
-
With wide frequency range from 1-20KHZ automatic tracking ability, no need adjustment at scene.
-
100% duty cycle , 24hours continuous working ability at maximum power.
-
Constant output voltage or power control modes are alternative;
-
Full display of output power, output frequency, output voltage and current.
-
The timer function: heating time and retaining time: 0.1~99.9second.
-
Simple operation, easy installation: connect the machine to 3 phase 380VAC and cooling water system only.
-
Timer can be chosen to present and adjust the heating time, heating power, retaining time, retaining power respectively to control the heating curve and heating temperature.
FAQ
1. Which countries your products are exported to?
Our products are sold all over the world.
2. How about the warranty?
All our products have one year quality warranty, and we provide life long time technical support and other assistance.
3. How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
4. Which export port you use?
Any China port, commonly we will use Ningbo, Shanghai port, it can appoint as you like.
5. How about the payment terms and delivery time?
Payment terms for small machines: 100% T/T/ Western Union/Paypal/Cash in advance.
The big machines and big amount: 40% deposit, 60% before shipment (we will shoot total delivering process for customer's confirmation)and the related papers.
You can pay by T/T, L/C. Usually, the small machine delivery time is within 7 days, the bigger one takes about 15days receiving the payment, we will delivery goods on time.
6. Is your goods has CE certificate?
Yes, all our goods has CE certificate. All machines are high quality goods.
7. What is your nature of your company: Dealer or factory?
We are manufacturer and have a big factory, warmly welcome to visit our factory and contact us.
Call or e-mail us now, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for you.
Your message must be between 20-3,000 characters!
